THE OLYMPUS OM-D E-M10 MARK III CAMERA
The third incarnation of the entry-level OM-D, the E-M10 Mark III adds stabilized 4K video to it's already notable 16MP Four-thirds CMOS sensor. For the still shooter the Mark III provides a snappy 8.6 fps continuous shooting, a 2.36M Dot OLED viewfinder and 121 selectable AF focus points.
The added 5-axis sensor-shift image stabilization delivers up to 4.0 EV stops of stabilization allowing for buttery smooth video. The Mark III adds the ability to shoot UHD 4K at up to 30p with an approximate bit rate of 102Mbps and C4K at 24fps.
KEY CAMERA SPECIFICATIONS
- 16MP Four Thirds CMOS sensor with no AA Filter
- 5-axis image stabilization (4 stops of correction)
- TruePic VIII processor
- 4K video with in-body and digital stabilization
- 8.6 fps continuous shooting (4.8 fps with continuous AF)
- 2.36M-dot electronic viewfinder
- 1.04M-dot tilting touchscreen
- 330 shot-per-charge battery life (CIPA standard)
THE NAUTICAM NA-EM10III UNDERWATER HOUSING
Nauticam has supported all previous models in the Olympus OM-D lineup and have applied that vast experience to the production of the NA-EM10III housing. Access to critical camera functions is the hallmark of all Nauticam housings and the NA-EM10III is no exception.
Exposure controls can be easily reached from the right handle including the main and sub-command dials for the adjustment of aperture/shutter speed as well as a thumb lever for video record. Thumb access to the customizable Fn1 button is also enabled.
PREMIUM PROFESSIONAL OPTICS
A variety of MFT lensed are supported and the N85 port system provides professional optics to take full advantage of them. In addition, the NA-EM10III supports the use of the WWL-1 wide-angle conversion lens that gives the shooter unparalleled sharpness, a 130º diagonal field and zoom-through capability.
The 2.36M-dot OLED electronic viewfinder is best viewed through optional Nauticam magnifying viewfinders, available in both 45º and 180º models. With an external dioptric the viewfinder can be adjusted without tools to the shooters eyesight.
INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM
The Nauticam vacuum check and leak detection system is shipped with NA-EM10III as standard equipment. Combined with an accessory vacuum valve, this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.
The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.